Go Back
Print
Recipe Image
–
+
servings
Smaller
Normal
Larger
Print
DIY Large Candle holder
Build your own large candle holder for under $25 and 30 minutes of your time.
Author
Melissa Coleman
Materials
1 Traditional Wood Table Leg
1 8" Pine Circle Plaque
1 6" Pine Circle Plaque
1 3" Pine Circle Plaque
2 Flat head screws
Stain or Spray Paint
Instructions
First, you will want to measure out the center of the 8" round plaque.
Once you have found the center, drill a small hole to allow for your screw to go through without any splitting.
Turn over your table leg and drill a small hole into the center as well. The table leg will actually be flipped from its normal use.
Now that you have drilled your pilot holes you can then drill your screw through the plaque and into the bottom of the table leg.
Repeat the process with the other plaques, find the centers of both plaques and make small pilot holes to guide your screw.
You will also need to make a small hole in the top of the table leg.
Attach your 6" and 3" plaques together, flat sides facing up, and screw into the top of the table leg.
Finish the candle holder off with your favorite stain or spray paint.